Most Recent Story

Water Basketball Goals

Water basketball can occasionally become an afterthought during the commercial swimming pool design process due to its relatively low startup and maintenance costs. Furthermore, water basketball goals can be accommodated in a variety of places across a typical leisure pool and are hindered by the available water depth more than the available space. Often times, they are placed somewhere in the lap lane area of a pool because the larger amenities such as play structures, current channels, and water slides demand specific water depth and clearance requirements that don’t align with the ideal conditions for water basketball. Counsilman-Hunsaker has recognized a need to consider water basketball during the schematic design phase of a project with the type of water basketball goal specified becoming a function of the pool overflow system (gutter vs. skimmer), the ability to move the goal, and the desire to have an adjustable height goal. Each type of water basketball goal has its advantages and disadvantages that will be further discussed.


During initial phases of the design of a swimming pool, a “water basketball nook” should be considered accompanied by an on-looking underwater bench. By designating a confined area of the pool to water basketball, design teams can help mitigate un-desired interactions between calmer portions of the swimming pool and the unavoidable, yet popular, rowdy water basketball game. That being said, the type of water basketball goal to be specified for the pool contractor is determined by the pool overflow system. Water basketball goals have ideal setback distances from edge of the pool to the water basketball goal anchor. For example, SR Smith manufactures a water basketball goal known as the Swim N’ Dunk (S-BASK-ERS) with a setback distance of 18 inches. This smaller setback limits the type of pool that this particular goal can be installed on to skimmer pools. Obviously, the type of overflow system should not be a slave to the type of water basketball goal specified; however, it is important to keep these ideas in mind when discussing potential designs with a facility owner.

Figure 1: SR Smith Swim N’ Dunk Water Basketball Goal


Fortunately, SR Smith makes an extended reach model of the water basketball goal previously mentioned that increases the setback distance from the pool edge to 30 inches. The extended reach model could be used on a pool with a gutter perimeter overflow system, but it still lacks adjustability. The Spectrum Adjustable Basketball Hoop allows for the height of the water basketball goal to be raised and lowered. The Spectrum system uses a compression mechanism and two extension arms to do this. The setback distance for this goal is 26 inches and could be specified for a pool with a gutter system. Designers should keep this mechanism in mind when accounting for the surrounding deck space as the lever used to adjust the goal can have a large swing radius. It is important to note that any water basketball goal with an adjustable height should have a safety stopper to prevent the backboard from falling from its highest point. Without this safety implementation, backboards have been known to come crashing down on the coping stone below with some force.

Figure 2: Spectrum Adjustable Basketball Hoop


Both of the water basketball goals mentioned thus far have a fixed position. More specifically, they are anchored to the pool deck and, while they can be removed and stored, will more or less be there permanently.  Dunn-Rite, Inc. has a model known as the Splash and Slam that is both movable and has an adjustable height. The base of the water basketball goal is a hollowed polyethylene basin that weighs 500 pounds when filled with water. The water can then be drained to allow pool operators to move the goal. The backboard height can also be adjusted and leveled to compensate for the occasional uneven pool deck. This goal, while it has its advantages, would typically be specified if water basketball was considered as an afterthought during design. It is customizable, but lacks aesthetically and in sturdiness when compared to the fixed position goals.

Figure 3: Dunn Rite Splash and Slam


Water basketball goals should be a staple when it comes to leisure pool design because of their sheer popularity and low startup and upkeep cost. Ideally, the goal is placed in an area of the pool far away from where younger children will be playing and adults will be lounging. Different perimeter overflow systems demand different types of goals as fixed goals need to be provided with a deck mounted anchor. If all of these considerations are taken into account during the design phase of a project, water basketball can become the primary feature of a facility. They do bring with them many liability issues, but that is a topic for another discussion.


All Stories

Determining Filter Backwash Rate

Concrete construction is expensive, so it is important to be frugal when designing a new facility. This involves the way the pool is laid out for programming, but it also extends to the mechanical room, which most likely houses a backwash pit. Overestimating the size of the backwash pit means wasted concrete, while underestimating its […]